Forum User

My TDP7706 connects to the MSO64 but, the probe keeps blinking through the mode 4 selections. Do you know what the issue is?

Will the TMDP0200 work with the MSO46?

Hi.

I just tried using "cnvrtwfm -l -8- *.isf" and it converted 2 .isf files and for the rest if just replied "Peak Detect and Envelope Modes are not supported for the DPO 4000"

What to do?

Is there any other software that can help me convert these files? Or some forum thread that can help answer my questions? The ability to process these captured waveforms will help me decide on which brand of product to purchase.

Thank you for all your help.

I'm interested in getting an instrumentation cart for my K4200, but I couldn't find one on the website. Do you have one available, or plans to manufacture one in the future? If not, do you have a cart which you recommend that is available through a third-party seller?

How can I input a signal in real-time, modulate the frequency, to then generate an output from the unit? The frequency will be changing over time, similar to music.

Is the THDP0200 compatible with the TPS2014B? If not, can you recommend a similar option?

Hi,

I am using TCP305A to measure the current through a very small value inductor like tens of nH. Want to know the effect of the probe inductance on the effective inductance of the inductor under test.

The oscope is able to display waveforms <10Hz, but in the channel reading on the lower right of the screen, it will only say "<10Hz" when I send a 3 or 5 hz signal to the channel.
The only way I have been able to get the correct frequency reading is by selecting math.
I would like to know how to adjust the settings so that it actually displays the frequency when the frequency is <10hz.
I am also noticing a lag when the amplitude has been adjusted. While the oscope will correctly display the new wave form (for example changing from 2Vpp to 4Vpp) it will not correctly update the voltage value for that channel.

We recently purchased the TPP0500B probe to use with a DPO 7254 oscilloscope. There is a hard, static plastic alignment fin on the side of the probe connector that results in the inability to connect the probe to the oscilloscope. The other fins on the probe connector are mobile and appear to aid in keeping the probe connected. It appears if this was not present, we would not have an issue connecting the probe. I would like to know if there is a model that does not have this fin or another remedy that allows us to use this product.

I am looking to buy a new Keithley DMM6500. I would like to know if any software comes free with the meter. Specifically is any Kick Starter software included in the purchase of a DMM6500? I read on a forum that when the meter is registered on the Tektronix site, this allows some free software to be downloaded. I am buying this for hobby purposes and so i am price conscious.