-
THM565 Schematic
Greetings, My THM565 has failed. Upon examination I discovered that 4 electrolytic caps had failed. I have checked some obvious voltages, but I'm stuck. Is there a schematic available?
-
API for Linux interface for RSA306B?
I am looking for a way to receive raw data from the RSA306B using USB 3.1 connection on the RSA306B.
The data sheet mentions this possibility, but I was not able to find any documentation.
I am hoping to use this device for "Partial Discharge and Fault Detection of Critical High Voltage Transformers and Switchgears" in an academic setting.
-
TDS3014C replacement?
Can you suggest a replacement for the TDS3014C?
-
RSA 507A and OMNI-A0112 antenna issues
I'm having trouble getting my new OMNI-A0112 antenna to work with my RSA507A. I have an older antenna that showed up automatically in the RSA's antenna section, but this doesn't appear to be the case for the OMNI. Do you have any suggestions as to how to resolve this?
-
AWG70002B Always Rebooting Continually
When my AWG70002B tries to load it continually REBOOTS and I'm seeing ERROR CODE: 0XC000021A
-
2230-G-30-6 Altitude Specification
Hello,
Per the datasheet, the Keithley 2230-G-30-6 is rated to 2000m. We have an application that requires a power supply with comparable electrical performance at 3800m.
What is the limiting factor or the Keithley 2230-G-30-6 to operate above 2000m? Has it just not been qualified to that environment? Or is there a specific technical issue that is likely to occur?
Could Tektronix recommend a comparable unit that is rated operational at 3800m?
-
TBS1000 Digital Oscilloscopes Replacement?
Good Afternoon,
Could you please help us with this conundrum. We still looking for oscilloscopes to replace our aging TDS 1002Bs. We do not required high bandwidth (30Mhz or less will do), black and white display will be fine. The most critical feature we are looking for is the XY Mode that does not shrinks the display to a perfect square. We are not looking at a Lissajous Curve pattern. We are looking for a linear horizontal displacement cause by air pressure and where does it cross the Y-axis. That’s why we need the most resolution possible. We are shooting for a cost of $400 to $600 each.
-
MDO32 3-BW-100 SUP3-AFG upgrade question
Does the MDO32 3-BW-100 have to have the the SUP3-AFG installed from the factory, when purchasing, or is this a user installable option?
-
MDO4104C AFG Function Upgrade
Are the AFG functions on m MDO4104C paid upgrades for the unit, and if so, what information can you share upgrades?
-
DPO7000 default Admin Password?
My DPO7000 powers up, but I cannot login. Is there a default admin password?