Forum User

Hi,
I'm looking at purchasing the P6021A and wanted to confirm what the connector was. Does this probe connect only to Tek scopes or to generic BNC connectors? Thank you!

I was connecting my Tektronix MSO44 to a PC through a USB cable. My PC could detect the device. However when I run it through Labview using visa and the drivers that is provided online, it couldn't communicate properly. I have checked it using NI-max and there is a yellow exclamation beside the connection whereas the other connections which are fine don't have such an issue. The above connection was achieved by an USB-B to USB-A connected to the USB Device port. The USB-A to USB-A to the USB host port don't work.

What types of oscilloscopes can the P5205 High Voltage Differential Probe connect to?

I need to connect to tbs2000b to pc to save screen shots and wave forms I have tried via ip address but it ask for password?

s it possible to buy some sort of adapter for the back of the tdc210 to be able to connect it to a computer for interfacing with matlab or labview?

Are the TBS2072 and P5210 compatible with each other? Also how many voltages the probe is capable of handling?

I would like to know if the following probes works on the MDO 3 series scope we have. TDP1500, TCP0020 THDP0200. Thanks in advance!

How do you recommend adding CH1 and CH2 signals? I currently use an op-amp, but would prefer to use a BNC "T" connector. Would this method damage the AFG1062?

I want to download SignalExpress for readout of the FCA3100 we have in the lab, is it possible to get an output without the program?

We have a DPO 2024 and we would like to remotely see the screen and change the controls of the scope from a remote computer.