Forum User

Good morning, we have a DMM6500 requiring re-calibration. Can you please provide me with whatever steps are necessary to get my DMM calibrated?

Hello,
Does the CT-1 current probe require calibration? If so, please advise how to calibrate the probe. Thank you.

Are the P7700 Series TriMode Probes calibratable? If so, will you provide me with the calibration procedure?

Do the TPA-BNC adapters require periodic calibration

I am building a test fixture for a 2657A and I am having issues finding compatible cabling/connectors similar to your HV-CA-554 and HV-CA-571.
What is the coax used for the HV-CA-554 cable and what are the part numbers for the connectors on those cables?

Is there a list of cables that are compatible with the 2290 so that I can connect the unit to a meter?

Do you have adapters for the 2450s 4.0 Probe Tool? I have a 2400 and need an adapter to convert the BNC connectors to banana plug connectors so I can use the probe tool with it.

I'm using a P6616 probe with a series 4 MSO but moving into a more permanent setup I'm looking for a probe cable ending in a rectangular header or similar standard connector to reliably and permanently connect all 16 channels.
Is cable or adapter available?

Will the C#.NET driver we currently use with our existing TBS1064, also work with the TBS2204B and TBS2074B?

I am getting burning smell from the meter when i am preforming resistance measurements.