Tektronix Applications Expert

Hello,

Below you will find a link to the TDS3000B series declassification document. You can search for an instrument's declassification document by filtering the search type to Manual > Declassification.

https://www.tek.com/en/oscilloscope/tds3014b-manual/tds3000-and-tds3000b-rev

Hello,

The frequency measurement algorithm displays the first complete cycle in the record. You can also use cursors to measure the exact cycle you want measured.

Using an SMU236 and an Agilent N9010A spectrum analyzer measuring the voltage difference across a discrete 24K resistor supplying a 20uA current, the recommendation is to apply a Low-Pass Filter on the SMU Output

Yes the AFG3011C can produce a 10MHz 20Vpp continuous sine wave into 50Ω.

Thank you for evaluating Kickstart for your photovoltaic cell testing. Unfortuntately trial extensions for Kickstart are not available.

Please check the time in Windows on the scope is set correctly.
Please check the clock on the scope UI to see if it matches the time in Windows on the scope.
1. Set the time in Windows so that it is correct.
2. In the scope go to Utilities -> Set Time and Date…
3. In the Set Time and Date Pane click the “Get date and time” button then click the “Set time and date now” button.
4. Restart the scope

Please find the location to download FlashWizard and its release notes here: https://www.tek.com/en/support/software/firmware/c12

SignalVu-PC can be downloaded at the link below:

https://www.tek.com/en/support/software/application/signalvupc-vector-signal-analysis-software--v410022

The TDS2022 did not have customer upgradable firmware. You can create an RMA for calibration and state you need the firmware updated and Tektronix can do that during calibration at our factory service center, see contact information below:

To set up a repair RMA (model and serial number)
call 1-800-833-9200 opt 2. Or 1- 800-438-8165
Or send an email to rmarequest@tektronix.com
Or https://www.tek.com/en/service-quote
Or https://www.tek.com/en/services/repair/mytek_rma_request

The P2220 is a good option for working with the TDS 224

If you are interested in placing order or parts pricing, please reach out to our sales at 1.800.833.9200 option 1 or email the request to buy@tektronix.com.