Expert Tektronix Applications

On the A622 we provide functional Verification. We do not calibrate.

You can find the specifications in the user manual:

https://www.tek.com/en/manual/current-probe/a622-100-amp-acdc-current-probe-instructions-current-probes

Hello,

The EECN for the MSO58LP is 3A992. You can use our Export Classification tool to find this number, along with other export information: https://www.tek.com/en/support/export-codes.

Hello,

Both scopes have a DC gain accuracy of 1.5% above 5mV/Div (derated at 0.100%/°C above 30 °C). You can find the exact specification for both scopes in their respective datasheet

MDO3000 see page 6:
https://www.tek.com/en/oscilloscope/mdo3000-mixed-domain-oscilloscope-manual/mdo3000-series-4

MSO4000B see page 3:
https://www.tek.com/en/oscilloscope/mso4000-dpo4000-manual/mso4000b-and-dpo4000b-series-0

Hi,

I don’t personally have much experience scripting with Matlab, but we do offer some sample/example/demo scripts on the Tektronix forums and Github pages. I would suggest referencing these or even building your code from these examples. The ‘simple plot’ script and demo video discuss how to collect data from the scope and then plot that data, similar to what you are requesting.

Tek Forum Programming Examples: https://forum.tek.com/viewtopic.php?f=580&t=133570
• MATLAB ICT: MDO Simple Plot: https://forum.tek.com/viewtopic.php?f=580&t=141809
• Simple Plot Demo Video (python): https://www.youtube.com/watch?v=W5Brxiwnp5g

Tektronix Github: https://github.com/tektronix/Programmatic-Control-Examples

Test Automation and Python Programming Lecture: https://www.tek.com/de/video/webinar/test-automation-and-python-programming

Hello,

Using the following commands you can set or query the callout text position.
CALLOUTS:CALLOUT:DISPLAYPOSition:X
CALLOUTS:CALLOUT:DISPLAYPOSition:Y
More information about these commands can be found on page 2-383 (PDF 405) of the programmers manual.

https://www.tek.com/en/manual/oscilloscope/4-5-6-series-mixed-signal-oscilloscope-programmer-manual-5-series-mso

Hello,

Please ensure that the USB stick is formatted as the FAT32 file system.

Hello,

The current TIVP IsoVu Isolated Probes will only work with our newer MSO44, MSO46, MSO5 Series and MSO6 Series scopes. They will not work on the MSO4034B.
There were older IsoVu Isolated Probes the TIVM and TIVH Series IsoVu™ probes that would work on the MSO4034B but they are out of production now.

Hello,
The manual for the P2220 is on Tek.com see link below.
https://www.tek.com/en/passive-probe-manual/p2220-200-mhz-1x-10x-passive-probe
The hook tip part number is 013-0107-08

To order a part call 1-800-833-9200 opt 1.
Or send an email to buy@tektronix.com

Hello,

Both of these are 10X attenuation probes, so the scope needs to multiply the voltage at the interface by 10. This is why you see a 5mV/Div minimum. To avoid this, you would need to use a 1X probe.

1k points is minimum on MDO32