Expert Tektronix Applications

The DPO2024B cannot provide probe power without an additional power supply. Please see https://www.tek.com/en/documents/technical-brief/tekvpi-probe-power-requirements-digital-phosphor-oscilloscopes for details.

The drivers supplied by Tektronix are all included in TekVisa, so you should be fine there. The TBS2204B is compatible with the TEK-USB-488 adapter. Both probes you have listed are directly compatible with the TBS2204B (no required adapter), but they will require manual setup. These setups can be done in the channel menu under Probe Setup and are fairly straightforward. The Rackmount Kit for the TBS2204B would be the RMB2040

The best software to easily control instruments and record data is KickStart:
https://www.tek.com/en/products/keithley/keithley-control-software-bench-instruments/kickstart

You can find this information at the following link:
https://www.tek.com/en/support/export-codes

The number of triggered acquisitions is shown in the bottom right corner of the display.

Here is the box link for the ISO file for the recovery media DVD.
https://fortive.box.com/s/285p680bh5ju0vauhw6jy1v8anrt6qvi

This is not currently an option in TekScope firmware v 1.36 for non-Windows. In v 1.34 it was noted as a known issue so there may be an option to change this in future TekScope FW versions. This is the default way Linux handles timestamps for copying files. This is a non-issue for Windows versions. A workaround is to save the files/screenshots directly to a network or USB drive to avoid copying from the scope to an external drive later.

Are you importing an image to use as the map? If so I would advise using openstreetmap or other similar programs for map data. This provides two advantages. Firstly, you will not loose resolution, and second it will automatically be a geo-referenced map.
We generally recommend calibration once per year, or if the unit fail.
http://www.openstreetmap.org/

Link below is where you can download the software for a 30-days trail once you register and create an account:
https://www.tek.com/en/products/keithley/keithley-control-software-bench-instruments/kickstart
Link below to Kickstart data sheet Page 7 has the discussion on the power supply App that you use for the 2230.
https://www.tek.com/en/datasheet/kickstart-instrument-control-software-datasheet

Yes it is normal to press the Power Preset button to prepare for a new measurement.