Forum User

Hello,

I have a brand new MDO34. When I power on the MDO34 after being off overnight, the unit makes a random low volume muted clicking sound.
The range and cycle changes during the power on. Almost sounds like a very slow speed fan blade tick.

Sound ceases after about 5 mins of power on time. Maybe the function generator is performing a self test?

Is this normal?

How do I set the maximum time of recording from 2 Channels at 100GHz samples per second from my DPO72304DX?

What is the maximum temperature that the 4200 would run at? I'm not sure if there is a technical term for it, such as "Thermal Load" or "Heat Radiation," but I need to know before setting up my lab.

Does the TBS2204B have MATLAB drivers?

I Want to display a mathematical post processed output from two measured channels.
I am measuring the output of a mixer. The I channel voltage is measured on Channel 1 and the Q channel on Channel 2. If I do the trigonometry, I can get the phase info or the amplitude info over time. Triggering is on another channel and there is averaging.
Is there a way to do this internally like with a plugin card?
Or is it best thru labview?

What is the margin of error of the TBS2072 while doing automatic measurements?

Where are the TPA-BNCs manufactured?

Hello,

I am looking for a Lower end oscilloscope along the lines of a TDS1000. Needs are AC-DC waveforms for X-Ray equipment.

I have a P6139B probe that is missing the Insulator Sleeve (204-1226-xx according to Doc 071271000_Rev A) and would like to purchase a replacement.

Can you recommend a replacement for the TDS2014