Tektronix Applications Expert

Hello,

You can use measurement gating to specify the area you want the scope to measure. To use measurement gating, double-tap on the measurement and then select the Gating tab. There are a couple Gating types, I would suggest using Cursors or Time. With these gating options, you will need to use the Multipurpose knobs to move the cursors or start/end gate time. This will allow you to measure just the first rise and fall of the signal.

There is also a Time measurement called Data Rate that I believe will do what you are looking to do. This measurement gives the reciprocal of the Unit Interval.

Version 1.1 of KickStart does not support the SMU2450. Please download the latest version of KickStart.

Thank you.

Hello,

You can find remote connection commands in the Programmer Manual: https://www.tek.com/en/oscilloscope/tbs2000-basic-oscilloscope-manual/tbs2000b-series-oscilloscopes

Hello Will,

Please email software-downloads@tektronix.com directly with the email used for your Tek.com account and ask for clearance.

Tektronix must comply with U.S. government export control policies. This is basically a pre-screening process that is reviewed and cleared by our software downloads group before you're allowed to download software from our website. To expedite the pre-screening process email software-downloads@tektronix.com directly with the email used for your Tek.com account and ask for expedited clearance.

Hello,

Yes you can use the second channel to create a differential signal with the AFG1062. Instead of having CH2 be the inverse of CH1 you will need to have CH2 have a start phase of 180°. Be sure to align phase after adjusting any phase or frequency settings.

Yes the 159006300 is the fuse used on the DMM4050. Cost is about $18.00
3AG, 0.125A, 250V, 30SEC

To order a part call 1-800-833-9200 opt 1.
Or send an email to buy@tektronix.com

The THS720P will work find plugged in with out a battery. +12 DC, 1A,; 2.1 ID, 5.5 OD.
More information in the manuals.

A web search for the battery could show a few places with replacements but I can't recommend any or know anything about them.
Battery was BATTERY PACK; 4.8V, 2.8AH;NICAD, 4 C CELLS IN SERIES, 1.05 X 7.78,

The best replacement for the current capability is the Model 6430 source meter.
It can source current from 1A to 1e-17A.

Link below to the data sheet:

https://www.tek.com/en/products/keithley/low-level-sensitive-and-specialty-instruments/electrometers

TPP0101 as compatible probe for the 2235. See more info here:

https://www.tek.com/en/datasheet/passive-10x-voltage-probe-0

If you are interested in placing order or pricing, contact sales at 1.800.833.9200 or email the request to buy@tektronix.com.

Please contact Tektronix service team directly. Below you can find the contact Ask about insurance against accidents as well if you want to protect your instruments.
Tektronix/Keithley Repair/Calibration:
Web: https://www.tek.com/en/service-quote
Email: rmarequest@tektronix.com
Calibration services for all other products:
Web: https://www.tek.com/fastquote
Email: mvs@tektronix.com